Choosing the right aluminum composite panel (ACP) is not just about picking a color. The size, thickness, core type and coating you select determine how the panel performs on a facade, inside a kitchen, on a sign board or inside a vehicle. This guide explains the standard ACP panel sizes, thickness options, tolerances and specification choices that buyers, architects and procurement teams need to know before requesting a quote. As an ACP manufacturer in China since 1994, FEITENG supplies panels to customers in more than 56 countries, and the specifications below reflect the formats we run every day on our production lines.
An aluminum composite panel is a flat sandwich material made from two thin aluminum sheets bonded to a non-aluminum core. The core is usually low-density polyethylene (PE) for standard panels, or a mineral-filled fire-retardant core for fire-rated applications. Because the two aluminum skins are bonded to a stable core, the panel stays flat and rigid while remaining far lighter than a solid aluminum sheet or a thick metal plate. That combination of flatness, low weight and low cost is why ACP is used across building facades, interior decoration, advertising signage, kitchen and bathroom wall finishes, and even truck and bus interiors.
When you write a specification for ACP, you are actually defining four layers of information: the overall sheet size, the overall thickness, the thickness of each aluminum skin, and the coating finish on the face skin. Getting any of these wrong can lead to panels that flex too much, delaminate, fade quickly or fail installation. The sections below walk through each decision.
ACP panels are produced in large coils-to-sheet lines and then guillotined to standard stock sizes. The most common regular sheet sizes exported from Chinese factories are 1220 mm × 2440 mm (4 ft × 8 ft) and 1250 mm × 2500 mm. Other common stock dimensions include 1000 mm × 2000 mm, 1220 mm × 3050 mm and 1500 mm × 3050 mm. Because the panels are cut to order, custom widths and lengths are available, but standard stock sizes keep lead times short and unit prices competitive.
Width matters because it determines how many panels fit across a wall or how few joints are visible on a large facade. A wider sheet reduces the number of vertical seams, which improves both the appearance and the water-tightness of the cladding. Length determines how the panels span between fixing points; longer sheets may need extra support if they are used horizontally on a tall elevation. When planning a project, always ask the supplier which stock sizes are held in stock and which require a custom cut, because custom sizes often carry a longer lead time and a small cutting premium.
Overall ACP thickness typically ranges from 2 mm to 6 mm, with 3 mm and 4 mm being the most widely used. The thickness you choose depends mainly on the application and the span between fixings.
It is important not to confuse overall panel thickness with skin thickness. A 4 mm ACP can use 0.10 mm, 0.15 mm or 0.21 mm aluminum skins, and the skin choice affects durability independently of the total thickness.
The aluminum skins determine wear resistance, dent resistance and the panel's ability to hold a flat finish. Common skin gauges are 0.08 mm, 0.10 mm, 0.12 mm, 0.15 mm and 0.21 mm. Thinner skins are cheaper and suit indoor use; thicker skins are specified for exterior facades, coastal environments and locations prone to impact or vandalism. For high-end architectural projects, 0.15 mm or 0.21 mm skins are often paired with a PVDF coating to deliver a long service life and reliable color retention over decades.
If your budget is limited, resist the temptation to reduce skin thickness on exterior panels. The core and the skins work together: a thin skin can crack or stretch under impact even when the total panel thickness looks adequate. For projects that will be cleaned regularly or exposed to salt spray, invest in a heavier skin rather than saving on this layer.
The core defines the fire behavior of the panel. Standard PE cores are low-cost and tough, suitable for indoor and general outdoor use. Fire-rated cores are mineral-filled or mineral-based and are classified according to standards such as A2, B1 or B2 depending on the market. Choosing the correct core is a safety requirement in many countries, particularly for high-rise facades, public buildings and enclosed spaces. Always confirm the fire classification required by your local building code before you select a panel; more on this distinction is covered in our guide to PE and PVDF coated finishes and in the building grade ACP range.
| Application | Recommended Thickness | Skin Gauge | Typical Core | Coating |
|---|---|---|---|---|
| Indoor signage / display board | 2–3 mm | 0.08–0.10 mm | PE | PE |
| Kitchen splashback | 3 mm | 0.10–0.12 mm | PE | PE or PVDF |
| Bathroom wet-area wall panel | 3 mm | 0.10–0.12 mm | PE, mold-resistant | PE |
| Exterior building facade | 4 mm | 0.15–0.21 mm | PE or fire-rated mineral | PVDF |
| Outdoor advertising sign | 3–4 mm | 0.12–0.15 mm | PE | PVDF |
| Truck, bus or marine panel | 4–6 mm | 0.15–0.21 mm | PE or mineral | PVDF |
| Digital printing substrate | 3–4 mm | 0.10–0.15 mm | PE | Print-primed |
A smooth order starts with accurate measurements. For a wall cladding project, measure the wall width and height, account for openings such as windows and doors, and work out the panel layout so that seams land where they are least visible. Decide whether the panels will be fixed with hidden fixings, structural adhesive or an aluminum sub-frame, because the fixing method affects panel span and thickness choices. Prepare a cutting list with each panel's exact width, length and quantity, and note any special requirements such as a brushed finish, a special color or a protective film.
When you request a quote, send the supplier the application, the quantity in square meters, the required thickness, skin gauge, core type and coating finish. Good suppliers will confirm tolerances, edge treatment, packaging and lead time before production. You can see how FEITENG structures its production quality controls in the ACP technology and testing lab overview, and review completed work in the project case galleries.
Several recurring mistakes cause problems after installation. The first is specifying an interior-grade panel for an exterior elevation, leading to fading or delamination within a few years. The second is ordering panels without confirming the fire classification required by the local code, which can hold up inspection. The third is mixing up panel thickness with skin thickness, which leaves the skin too thin for a demanding environment. Another common error is forgetting to account for expansion and movement joints, which can make panels buckle in hot weather.
To avoid these issues, build your specification from the application outward: decide where the panel will go, determine the load and exposure conditions, choose the thickness and core, then pick the coating and skin gauge. Review the signage grade ACP, vehicle and ship grade ACP and kitchen splashback panels ranges to match the product family to your use case, and read our maintenance guidance in the article on cleaning and maintaining ACP panels to plan the long-term upkeep of your installation.
What is the standard size of an ACP sheet?
The most common standard size is 1220 mm × 2440 mm (4 ft × 8 ft). Other common stock sizes include 1250 × 2500 mm, 1220 × 3050 mm and 1500 × 3050 mm, and custom cut sizes are available on request.
Which ACP thickness is best for exterior walls?
For exterior building facades, 4 mm ACP with a 0.15–0.21 mm aluminum skin and a PVDF coating is the standard architectural choice. Thinner panels are generally unsuitable for exposed elevations.
What is the difference between panel thickness and aluminum skin thickness?
Panel thickness is the total sandwich thickness (2–6 mm), while skin thickness is the gauge of the aluminum face and back sheets (typically 0.08–0.21 mm). Both are specified separately and affect durability in different ways.
Can ACP panels be cut to a custom size?
Yes. Suppliers cut large stock sheets to custom widths and lengths according to a cutting list, but custom dimensions usually have a longer lead time than standard stock sizes.
How do I choose between a PE core and a fire-rated core?
Use a PE core for general indoor and light outdoor use, and a mineral or fire-retardant core where building regulations require fire performance, such as high-rise facades or public interiors. Confirm the required fire class with your local building code.
About this article: FEITENG (Zhangjiagang Feiteng New Composite Materials Co., Ltd.) has focused on metal composite panel production since 1994. Our 110,000 sqm factory runs 15 production lines and holds ISO9001, ISO14001, ISO45001, CE, UL, SGS, CTC and CQC certifications. This specification guide reflects our production experience serving customers in 56+ countries. For samples or a tailored quotation, contact the FEITENG team.
Zhangjiagang Feiteng New Composite Materials Co., Ltd.
Address:No.77 Huada Road, Environmental & New Material Industry Park, Bonded Port Zone, Zhangjiagang City, Jiangsu, China
Phone:+86 18151586877
E-mail:info@feitengacp.com
COPYRIGHT © Feiteng All RIGHTS RESERVED.