The core is the part of an aluminum composite panel that most determines how the product performs in a fire. Standard PE cores are affordable and tough, while mineral-filled fire-rated cores are engineered to slow flame spread and limit smoke. Choosing between them is not a budget-only decision: it depends on the building type, height, occupancy and local facade regulations. This guide explains how PE and mineral cores differ, what fire classes such as A2, B1 and B2 mean, and how to specify the right core for your project. As a long-standing ACP manufacturer in China, FEITENG supplies both standard and fire-rated panels to markets worldwide.
In an aluminum composite panel, two thin aluminum skins are bonded to a central core. The core provides the panel's thickness, impact cushioning and dimensional stability, while the aluminum skins carry the finish and protect the core from the environment. Because the core sits between two protected skins, its behavior under heat and flame is critical to the whole panel's fire rating. A panel that looks identical on the surface can perform very differently in a fire depending on whether its core is PE or mineral-based.
Buyers often focus first on color and coating, but the core choice has a larger impact on safety and compliance. Before selecting a panel for an exposed facade, public interior or transport application, confirm the fire classification accepted by your building authority.
Polyethylene (PE) cores are lightweight, low-cost and provide good impact resistance and moisture resistance. They are widely used for indoor decoration, kitchen and bathroom wall panels, signage, display boards and light-duty exterior applications. PE cores are compatible with standard fabrication methods such as cutting, folding and routing, and they deliver the familiar flat, rigid ACP panel at an approachable price.
The limitation of PE is its combustibility. Under high heat, polyethylene can melt and burn, which releases energy and can contribute to fire spread. For this reason, PE-core panels are generally not permitted on high-rise external walls, public assembly buildings or enclosed commercial spaces where regulations demand a higher fire class. They remain a sensible choice where fire exposure is limited and cost is a priority.
Fire-rated ACP cores are filled with mineral compounds such as aluminum hydroxide or magnesium hydroxide, often combined with a small portion of polymer binder. These mineral ingredients absorb heat, release water vapor when heated and help slow flame spread, reduce smoke and limit the contribution of the panel to a developing fire. Mineral-core panels are the standard choice for high-rise facades, curtain walls, schools, hospitals, transport hubs and other buildings where facade fire safety is tightly regulated.
Fire-rated panels are available in several performance grades, commonly labeled A2, B1 or B2 depending on the testing standard used in the destination market. The exact classification must be verified against the standard required locally, because ratings are not always directly interchangeable between regions. Reputable suppliers provide test reports and third-party certificates for their fire-rated ranges; FEITENG's testing and R&D lab supports this verification process.
Fire classifications describe how a material contributes to fire behavior. In common European-influenced schemes, A1 and A2 are non-combustible classes, B1 is fire-retardant, B2 is combustible but with limited flame spread, and B3 is highly combustible. For ACP facades, projects typically specify A2 for the most demanding facades and B1 for many commercial applications. The classification covers the whole panel system, including skins, core and any adhesive or film components, so the entire assembly must be tested rather than the core in isolation.
It is important to distinguish fire performance from weather performance. A mineral-core panel can still be finished with a choice of PE or PVDF coating, and the two decisions are made separately. Fire rating addresses safety in a fire event; coating choice addresses long-term color and weather resistance outdoors.
| Aspect | PE Core | Mineral / Fire-Rated Core |
|---|---|---|
| Cost | Lower | Higher |
| Weight | Light | Slightly heavier |
| Moisture resistance | Good | Good |
| Fire behavior | Combustible, melts under heat | Flame-retardant, low smoke contribution |
| Typical use | Indoor panels, signage, splashbacks | High-rise facades, public buildings, curtain walls |
| Common grade | B2 and below | B1 or A2 |
| Regulatory suitability | Limited for exposed facades | Required where facade fire codes apply |
Following high-profile cladding fires in recent decades, many countries tightened regulations on external wall materials. Specifiers are now expected to document the fire behavior of facade materials, keep test reports on file and use panels that meet the required class for the building's height and occupancy. If you are importing panels for a project, check the local building code, any district-level facade requirement, and the acceptance of test standards before you order. A cheaper PE-core product can create costly delays or remediation if it fails compliance review.
Fire safety does not end with panel selection. Fixing systems, sealants, insulation and panel joints all contribute to how the facade performs in a fire, so the wall should be treated as a system rather than a single material. For information on how panels are assembled and maintained, see our guides to ACP cleaning and maintenance and building grade ACP panels.
Start by classifying the application: indoor decorative use, wet-area wall finish, outdoor sign, low-rise cladding or high-rise facade. For indoor and light-duty outdoor uses where fire exposure is low, a PE core usually offers the best value. For any exposed facade, public building, school, hospital or transport project, specify a fire-rated mineral core and confirm the required fire class with the local authority. Always request the corresponding test report and certification before production, and review the full system design with your installer or facade engineer.
FEITENG produces standard and fire-resistant ACP for a range of end uses, alongside digital printing grade panels, signage grade panels and vehicle and ship grade panels. Our sustainable production approach is outlined on the sustainable development page.
What is the difference between PE core and mineral core ACP?
A PE core is a low-density polyethylene center that is economical and lightweight but combustible. A mineral core is filled with heat-absorbing minerals to slow flame spread and reduce smoke, making it suitable for fire-sensitive facades and public buildings.
Which ACP core is required for a high-rise facade?
High-rise external walls typically require a fire-rated mineral core, commonly rated B1 or A2 depending on the local code. Verify the accepted fire class and test standard with your building authority before specifying.
What do A2, B1 and B2 mean for ACP panels?
These are fire-performance grades. A2 is effectively non-combustible, B1 is fire-retardant, and B2 is combustible with limited flame spread. The rating applies to the full panel assembly, not just the core.
Can a fire-rated ACP still have a PVDF coating?
Yes. Core fire rating and surface coating are separate choices. A mineral-core panel can be finished with PE or PVDF coating according to the weather requirements of the location.
Are mineral-core panels more expensive?
Generally yes, because of the mineral formulation and additional fire testing. The premium is offset by lower compliance risk on regulated projects, so choose the core based on safety requirements rather than upfront price alone.
About this article: FEITENG has manufactured metal composite panels since 1994 and holds ISO9001, ISO14001, ISO45001, CE, UL, SGS, CTC and CQC certifications. This overview is for specification guidance and does not replace local building-code review. To discuss a fire-rated or standard ACP order, request a quote from FEITENG.
Zhangjiagang Feiteng New Composite Materials Co., Ltd.
Address:No.77 Huada Road, Environmental & New Material Industry Park, Bonded Port Zone, Zhangjiagang City, Jiangsu, China
Phone:+86 18151586877
E-mail:info@feitengacp.com
COPYRIGHT © Feiteng All RIGHTS RESERVED.